Hi.
I have four cameras and in live mode none of the cameras will pan left or right. They all can tilt up and down. Holding the left or right pan in live mode says camera has reached its limit after a few seconds but the camera doesnt actually move. Calibration seems to go through the tilt up and down but does not pan left or right and completes. I have the same problem with all 4 cameras. The problem first appeared 2 weeks ago but resolved itself after several hours only to have the problem return again. The problem occurred 2 weeks ago but after several hours the issue resolved itself. The issue has returned and at the moment still has not corrected itself. This issues is happ3ning on all 4 cameras. Wifi signal is strong and firmware is updated to the most recent version.
Camera model is C9C3CA11.
Base model is H1L