[Round 33 | aosu Security Quiz] Why does the cruise stop at the old angle?😳

Events
1

image
image904×388 71 KB

:globe_showing_europe_africa: Round 33Panoramic Reset: When Should You Use It? :bullseye:

:bullseye: Q: When does it actually make sense to reset the panoramic image?

Picture this:
You just adjusted your camera last week to get a better view of the driveway. :wrench::automobile: Everything looked fine in live view, so you didn’t think much about it.
A few days later, you receive a motion alert. :mobile_phone_with_arrow: You quickly open the app to check the automatic cruise playback


Then a small doubt creeps in:

“Wait
 why does the cruise stop at the old angle?” :flushed_face:

You notice the panoramic thumbnail still shows the previous yard layout — before you moved the camera. The patrol points feel slightly off. The camera turns, but not exactly where it should.

So
 is this the moment to reset the panoramic image? :thinking:

:magnifying_glass_tilted_right: You can find the answer in the aosu Community.
:backhand_index_pointing_right: Search “How to reset the panorama picture? ” in the top-right search bar. :laptop:

:wrapped_gift: Prizes Up for Grabs

  • :balloon: Lucky Winner — 14-day Monthly Cloud Storage Service ×1 :cloud:
  • :trophy: Monthly Grand Prize — aosu Indoor Camera ×1 :video_camera: (join 3+ quiz rounds to qualify)

:white_check_mark: How to Participate

  1. Go to the aosu Community and search for the article title.
  2. Read the article and leave your answer in the comments under this post.
    All correct answers will enter this week’s lucky draw!

:alarm_clock: Quiz Period: Feb 27 – Mar 4
:loudspeaker: Winners Announced: Next Wednesday in the comments — stay tuned! :eyes:

:light_bulb: Think you know the answer?
Join the discussion! :sparkles:

1 Like
[Round 32 | aosu Security Quiz] Will the camera record if it's offline?đŸ“¶
2

The cruise may stop at the old angle because the panoramic data calibration may be outdated or the camera may have lost its orientation and needs to relearn its surroundings. Resetting the panorama in the settings or performing a calibration will fix this allowing the camera to recognize the new updated position.

3

Je prĂ©fĂšre le recopier en français : "En rĂ©initialisant l’image panoramique, vous pouvez corriger :

La caméra reconstruit sa référence environnementale

La piste de croisiĂšre se recalibre

La vignette de l’aperçu correspond Ă  la vue actuelle (mais j’aime bien conserver l’image du panorama enneigĂ© de l’hiver :star_struck:)

Le positionnement de la détection redevient précis

Parfois, rien n’est « cassĂ© ».

Le systÚme a juste besoin de réapprendre son environnement.

Il y a deux façons de réinitialiser le panorama :thinking:

Veuillez accĂ©der aux images en direct et maintenir l’image panoramique pendant quelques secondes, puis vous trouverez les boutons ‘‘RĂ©initialiser’’ et ‘‘Supprimer’’

Veuillez entrer dans la page des paramĂštres, trouver ‘‘auto cruise’’, puis couper dans la page pour rĂ©initialiser les images panoramiques."

image
image1430×1677 223 KB

1 Like
4

You can reset the panoramic picture in two ways through the Aosu app:

  1. Access the live footage and press the panoramic image for a few seconds, then you will find the options to “Reset” or “Delete.”
  2. Enter the Settings page, find “Auto Cruise”, then cut into the page to reset the panoramic images.
1 Like
5

Resetting panoramic picture, can help the camera rebuild its environmental reference, calibrate the cruise, the preview thumbnail match the current view and detection positioning become accurate again.

To reset the panorama, you will need to access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’. Another way to reset the panorama is, enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

1 Like
6

How to reset the panorama picture?

By resetting panoramic picture, you can fix :

  • The camera rebuilds its environmental reference

  • The cruise path recalibrates

  • The preview thumbnail matches the current view

  • Detection positioning becomes accurate again

Sometimes nothing is “broken.”
The system just needs to relearn its surroundings.

There are two ways to reset the panorama.

  1. Please access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’

  2. Please enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

1 Like
7

If cruise stops at the old angle, it may be because the panoramic data calibration is outdated or the camera may have lost its orientation and needs to relearn its surroundings. Resetting the panorama in the settings or performing a calibration will fix this allowing the camera to recognize the new updated position. You can reset the panoramic picture in two ways through the AOSU app:

  1. Access the live footage and press the panoramic image for a few seconds, then you will find the options to “Reset” or “Delete.”

  2. Enter the Settings page, find “Auto Cruise”, then cut into the page to reset the panoramic images.

1 Like
8

To reset the panorama.

1- Access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’

2- Enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

Resetting panoramic picture, have following results: rebuilds its environmental reference, The cruise path recalibrates, The preview thumbnail matches the current view, Detection positioning becomes accurate again.

Sometimes nothing is “broken.” The system just needs to relearn its surroundings.

1 Like
9

Sometimes, the cruise may stop at the old angle because the panoramic data calibration may be outdated or the camera may have lost its orientation and needs to relearn its surroundings. Resetting the panorama in the settings or performing a calibration will fix this allowing the camera to recognize the new updated position. You can reset the panoramic picture in two ways through the AOSU app:

  1. Access the live footage and press the panoramic image for a few seconds, then you will find the options to “Reset” or “Delete.”

  2. Enter the Settings page, find “Auto Cruise”, then cut into the page to reset the panoramic images.

1 Like
10

There are two ways to reset the panorama.

- Access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’

- Enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

By resetting panoramic picture, you can fix : The camera rebuilds its environmental reference, The cruise path recalibrates, The preview thumbnail matches the current view, Detection positioning becomes accurate again.

Sometimes nothing is “broken.” The system just needs to relearn its surroundings.

1 Like
11

You can reset the panoramic picture in two ways through the AOSU app: Access the live footage and press the panoramic image for a few seconds, then you will find the options to “Reset” or “Delete.” Enter the Settings page, find “Auto Cruise”, then cut into the page to reset the panoramic images.

Sometimes, the cruise may stop at the old angle because the panoramic data calibration may be outdated or the camera may have lost its orientation and needs to relearn its surroundings. Resetting the panorama in the settings or performing a calibration will fix this allowing the camera to recognize the new updated position.

1 Like
12

By resetting panoramic picture, you can fix :
 The camera rebuilds its environmental reference
 The cruise path recalibrates
 The preview thumbnail matches the current view
 Detection positioning becomes accurate again
Sometimes nothing is “broken.”
The system just needs to relearn its surroundings.
There are two ways to reset the panorama.
 Please access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’
 Please enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

1 Like
13

The cruise may stop at the old angle because the panoramic data calibration may be outdated or the camera may have lost its orientation and needs to relearn its surroundings. Resetting the panorama in the settings or performing a calibration will fix this allowing the camera to recognize the new updated position.

You can reset the panoramic picture in two ways through the Aosu app:

  1. Access the live footage and press the panoramic image for a few seconds, then you will find the options to “Reset” or “Delete.”

  2. Enter the Settings page, find “Auto Cruise”, then cut into the page to reset the panoramic images.

1 Like
14

By resetting panoramic picture, you can fix :

  1. The camera rebuilds its environmental reference
  2. The cruise path recalibrates
  3. The preview thumbnail matches the current view
  4. Detection positioning becomes accurate again

Sometimes nothing is “broken.”
The system just needs to relearn its surroundings

There are two ways to reset the panorama.

  1. Please access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’

  2. Please enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

By the way Captain,

I never received my Hall of Fame gift. But that is fine. Not a big deal.

but, I AM VERY UPSET that none of my messages to you and your team about not receiving my gift and asking you to assist me to track it ever replied to
.. :enraged_face:

1 Like
15

By resetting panoramic picture, you can fix :

  • The camera rebuilds its environmental reference

  • The cruise path recalibrates

  • The preview thumbnail matches the current view

  • Detection positioning becomes accurate again

Sometimes nothing is “broken.”
The system just needs to relearn its surroundings. :wink:

:face_with_monocle:There are two ways to reset the panorama.

  1. Please access the live footage and hold press the panorama image for a few seconds, then you will find the buttons ‘’ Reset ‘’ and ‘‘Delete’’

  2. Please enter the settings page, find ‘’ auto cruise’', then cut into the page to reset the panorama images.

16

We sincerely apologize for the delay. Your message may have been missed while we were on vacation, but upon receiving it, I immediately checked the shipping information for you. We have also shared the relevant details with you via message. :folded_hands:

If you have any questions or special requests, please don’t hesitate to contact us. We greatly appreciate your contributions to the community and truly value your feedback. We will continue to work hard to improve. :dizzy: :handshake: