So the illumination light on the C9L turn on with motion detection

General
1

Last night we were walking near one of the cameras in the front of the house. Lights didn’t run on as we walked within 10 feet of it. Is there a setting that needs to be changed

2

If your Aosu camera didn’t turn on the lights when you walked near it, it’s likely due to motion detection or night vision settings. Here’s how to fix it:

What to do:

  1. Increase Motion Detection Range
    Open the Aosu app
    Go to the camera settings
    Look for Motion Detection Distance and set it to Far
  2. Turn on Color Night Vision
    In the same settings menu, go to Night Vision Mode
    Select the middle option: Color Night Vision
    This turns on the spotlight when motion is detected at night
  3. Other Tips:
    Make sure the camera is clean and not blocked by anything
    Ensure the Motion Detection toggle is on
    Check the Activity Zone (if enabled), the area you walked in might not be within the detection zone
    Make sure your firmware is up to date in the app

After adjusting these, your camera should detect motion better and turn on the lights when it senses someone nearby.

All the best,
S.S